No wireless connection vista

Many thanks to you all. This was very helpful to know that I am not alone and that it is just a quirk of the Netgear router. Just one more though, for Steve. Presumably this is in a menu somewhere in Vista? Thanks again Ken. Select Manage Wireless Networks. All the networks will be displayed — those your computer's wireless can see, and those it has ever chosen before such as hotels or airports, in case it ever sees them again. Select the network that you no longer want.

The Change Adapter button becomes the Remove button green minus sign , available to be selected. Select Remove. That network is removed from the list of available networks. Good luck. My laptop detects the D-Link router when I open "select a newtwork to connect to",but shows a red cross.

It then tells me that the security settings in Vista do not match those for D-link. Any ideas. If you do, then you will need to configure the wireless adapter with the encryption settings on your laptop.

I'm not sure if this is a similar issue. No issues connecting with unsecure networks. My problem is I can't access the internet if there is a security password requirement. I never am prompted to enter the Network key. Something is probably set wrong on my system but I can't find a setting to force a password prompt if there is a secure access point. Please, someone, help.

At first I was able to "connect" but with limited access meaning no internet connection … I then disabled my router security and retried — I was then able to connect with no problem. Or you can open Network and Sharing center select Manage Wireless Networks from left pane , right click on the Network, select properties and check the box to Connect Automatically. What do I do when the connect to a network says "the settings saved on this computer for the network do not match the requirements of the network.

I have an issue with Vistas' wireless network settings. I have to continually connect to the router manually. I have the same issue as Steve. Everytime I boot my laptop, I need to specify the network name, the security key and the type of encryption. Despite checking the 'Start this connection automatically' box, it does not save the settings. Do you have any resource material that covers this type of issue?

I find lots of good stuff that covers the opposite hooking a Vista into an XP wireless setup. Thank you for your consideration. Sorry, Vista is neither easier nor more intuitive. To start with, simply by moving every single parameter to somewhere other than where it was, MS has made it harder on everybody. Then there are the piles of extra things to set, unset, unlock, whatever. Researching to get a new laptop on a secured network that works just fine with two XP laptops, three Linux devices, and a Mac, I have even found suggestions that it takes creating a new entry in the registry.

If MS had spent half the effort on evolving XP, instead of making all new chrome with less functionality, maybe it would have worked better. I don't know if anyone can help me, but I was running XP on my computer until a virus made me wipe the whole thing clean, and Dell gave me the Vista installation CD instead.

So I installed Vista, and I am not sure on how to connect to the internet in my apartment. I live with 2 other people, and we have a wireless router in the living room, but somehow my computer is not picking it up.

When I go into the 'Set up connection or network,' there is no option for me to manually add the wireless router. Is there a step that I am missing? Or some form of hardware. Any advice would be helpful. Marisa:…This may not be the solution to your problem….

Do you have any problems connecting to a hard wired router or modem? I was able to connect to our wireless network just fine for months, than the day before i lost connection. On the other pc, i can stil see the network broadcasting and i can connect to it the laptop refuses to see and connect to it even after the following steps:. Click Start. In the Start Search dialog box, type: cmd, and right-click cmd. Click Run as administrator.

Restart the computer C 2. I have done all that is said and still i cannot see the network nor can I connect to it after manually adding it. I am about ready to light it on fire if that would work, but I still have hope for someone out there to help me. Hi Team I am having problems trying to setup Vista Premium on wireless. I am not sure whether it is a problem with Vista or the wireless router settings. I tried all other security options and it still doesn't work It picked up automatically by the laptop but it doesn't connect.

I also have a problem accessing to internet using my wireless router. My wireless never ask me about the password for a WEP security enabled network, But it never connects neither… How could I insert the password in order to have access to the web? I'using windows vista…. Was i really talking to a ATT rep that i dont know. I'm able to connect to some unsecured networks neighbors, etc and even to a few that say they are secured poor setting of passwords IMO, since I was able to guess them.

However, I'm not sure how secure my computer is on unsecured networks. Right now if I want to do any banking or anything that could be potentially "dangerous" I do it on my desktop PC that does not have wireless connection, just direct to the modem. That's about as safe as you can get from your desktop to your router…beyond that is anybody's guess on who's tapped in.

Did you get a fix for this? I'm having the same problem, using WEP security. Don't have a domain name to give.. My laptop is a compaq presario windows vista and my router is a D-link DIR When i view my network sharing and sharing center window it shows that my laptop is connected to my home network and to the internet but when i check the HP home network center, it shows that my laptop's wireless adapter is connected to my Home network via my wireless router but I am not connected to the Internet.

I was able to connect to the internet on the first day i tried to use the wireless network then after 2 or 3 days, i have no more access to the internet. I've already tried rebooting our modem, router and PC and disabled and enabled my laptop's wireless network but it's not working. Your help will be greatly appreciated.

I'm getting so frustrated because school is almost starting. Please contact your network administrator or Internet service provider. Hi, my laptop is Compaq Presario C The wireless switch button is not working, and i follow the 3rd step of " Manually Setup a wireless connection " i found that i have only 4 options, i dont have the option which is highliighted in the step 3 " Manually connect to a wireless network ".

My school has a wired and wireless network all computers there are macs. My new Dell pc — using vista- recognizes the wireless network and says it's connected however when I open Internet Explorer it searches for the homepage but then says " Page cannot be displayed". Can anyone tell me why I cannot get on the internet wirelessly? I cannot get online using the ethernet cable either using Vista. Is it possible to put in the ip address etc manually on Vista?

I can do this with my mac and it works fine. I also have an older pc using Windows and I can connect to the network using the ethernet cable. Why not with Vista? I really need to use my pc at work. I've this kind of problem: Before I could connect easily to wireless internets. With this same password or passphrase my family has manage to connect the other laptops without any problems..

I'm not good with computers… Anyone? Had the same problems? What to do? Been through all of the above procedure, however upon reaching connection option, the "manually connect to a wireless network" is not included. Its see the router as wep protocol, then rejects the connection as failure in authentication.

What is this? Before I call tech support, I thought I'd see if anyone was still active on this thread. The home wifi network did not originally set itself up out of the box and tech support took hours, between Linksys and the subsequent tech support they sent me to.

I tried a fix for our printer going offline and then royally screwed up my settings while trying to recover my wifi connection — without creating a restore point beforehand. One computer is still connected to wifi without problems, though I'm not certain about printing. My computer can only connect to the internet via ethernet and I get printing error messages even if I plug the printer USB though the printer may have another problem.

Atheros that appear on my screen — how to determine which I'm to use if I'm following troubleshooting procedures? Network map — my McAfee security system is once again showing our home network and identifying all as friends 3.

I have no internet without the ethernet cable 4. I've powered off the router and modem multiple times. What will happen when I use a paperclip to reset the router? Will I lose IP addresses, etc? Can the wireless connection info in Control Panel be restored to a default state?

Bert : thank you Bert! You just saved Christmas, as resetting it from WEP to WPA Personal allowed my so to connect his new toshiba netbook to my apple airport extreme wireless. No PCs have been able to connect until now, but the macs and ipods had no problem.

Now both can. Hi i have a problem with my Lenovo laptop which is running Xp. Every time i try to connect to my cousins wirless network which is unsecured and has a linksys modem not sure which type it connects perfectly but when i open up the mozilla firefox it says " server not found". My cousins computer connects to the internet fine. I think the reason why my laptop wont connect because the data encryption setting is disabled but when i click on the authentication tab in properties of this network it says "IEEE I am shocked to see how many folks have had trouble getting their vista laptops to connect with their secured home wireless networks.

That is my problem. For a year we had an unsecured wireless network — my pc is running XP, my laptop is running XP, my Tivo network adapter can get on and my husband's vista laptop could. Then I secured the network. All devices except my husband's vista laptop can get on the network. Changed the ssid and for one night the vista laptop could make a new connection to the network.

But next night it couldn't. Have wpa-2 encryption, the linksys router has an option for both tkip and aes, I've tried tkip or aes on the vista laptop — neither works. The vista laptop says it's connected — the signal is strong, but limited access. This vista laptop can connect with any neighbor's unsecured networks — just not our secure one — even with all settings and passphrase matching and being entered appropriately.

I've spent hours this week trying. I poured through this thread and tried a few of the ideas — to no avail. I did unselect ITP6 — but that didn't make a difference. In addition, I have enabled our Mac Address Filtering and have our two wireless computers on there as the only allowed computers.

But from what I am reading elsewhere, anyone can access my wireless network? I know this is not the best security but I thought we had at least something. When I search all available wireless networks in my neighborhood, it does say that our network is a Security-Enabled Network. Can someone let me know if we are completely exposed right now for anyone to get onto our network?

John : Did you hear of a solution? I have the same issue. Thanks Joanne. To fix a problem of not getting connected by wireless above 2 options are suggested everywhere and somehow I don't see both the options in my laptop. I used vista. My computer does detects networks but I can't connect to it.

A message appear it does take longer than usually. I found it quite harder to set up rather than xp. Until today it still unable to connect. Using a desktop alternatively. I have a dell xps laptop with windows vista home premium 32 bit sp1. John : I have the same problem John, Would appreciate if you got a solution.

I just installed a lynksis Valet router. I have checked the "automatically connect.. I have talked to lynkis tewch couple times, they remotely controlled my lkaptop to try to fix but t no avail..

Oh yes, Once i am connected i stay connected just fine but it wont auto-connect…tks! I had the same thing on my laptop with Vista home — I could not see or connect to my wirless router. I wish the Vista-help would have been more helpfull…. When i try to connect to wireless network with the Router, it throwing the error message ha " Unable to Connect to the Networks". I have a Netgear wireless router.

I have four computers hooked up to the router via ethernet wire 2 XP destops and two Vista laptops. When using the wired connection, the Vista laptop can see and access all computers on the network, however, when I switch the laptop to wireless, it only sees the other Vista laptop.

The laptop can access the internet while wired or wireless. I am using WEP security. Can anyone tell me what to do to get the laptop to see the entire network wirelessly? To address this behavior, Windows Vista includes a new wireless network setting that indicates whether a wireless network is broadcast or non-broadcast.

In Windows Vista, you can locally configure the new setting:. When the Connect even if the network is not broadcasting check box is selected, the Wireless Auto Configuration feature sends probe requests to discover if a non-broadcast network is in range. A Windows Vista client computer sends these probe requests when the computer is configured to automatically connect to the network. Therefore, even though the wireless access points do not broadcast the name of their wireless network, they appear in the list of available wireless networks when they are in range.

When the client computer detects that the network is in range, Wireless Auto Configuration tries to connect to the network regardless of whether it is configured as a broadcast network or as a non-broadcast network. By sending probe requests only for automatically connected non-broadcast networks, a Windows Vista wireless client computer reduces the situations in which it discloses its wireless network configuration.

You can also configure a non-broadcast wireless network to be manually connected. You can then control exactly when to send probe requests. A manually connected non-broadcast wireless network always appears in the list of available networks. Therefore, you can connect to the network as required.

You can use the Connect to a Network wizard to connect to non-broadcast networks in Windows Vista. When a Windows Vista wireless client computer receives a beacon frame that includes a null SSID, Windows Vista adds the wireless network to the list of available networks. Then, Windows Vista names the wireless network "Unnamed Network.

Need more help? Expand your skills. The English version of this hotfix has the file attributes or later file attributes that are listed in the following table. When you view the file information, it is converted to local time. Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section. This problem was first corrected in Windows Vista Service Pack 1. Need more help? Expand your skills. Get new features first.

Was this information helpful? Yes No. Thank you! Any more feedback? The more you tell us the more we can help.

Can you help us improve? Resolved my issue.